Hey there, I’m Jake, and I’ve spent the last 12 years in the farm shed game—spending half that time driving a ute down back country roads, knocking on farm gates, standing in muddy yards while farmers grumble about their gear being stuck in the rain, or their quad getting banged up by a wayward chainsaw. The question I get asked more than any other, every single week, from grain growers to cattle operators to hobby farmers itching to upgrade their old John Deere? “What size farm shed do I actually need for my equipment?” Farm Sheds

I’ve seen it all. I watched a grain grower in central Victoria build a 12x18m shed for his combine, only to spend three months cursing because he couldn’t swing the header’s auger out to empty the grain cart without scraping the side wall. I helped a hobbyist dairy farmer go 9x15m for his tractor and two utes, only to have to borrow a neighbour’s space when he brought home a second-hand slurry spreader that wouldn’t fit through the door. Last year, I worked with a beef farmer in Western Australia who wanted to overbuild for his quad and chainsaws, and he ended up using the extra space to park his wife’s caravan during muster season, so it turned out he made the right call—just for a different reason than he planned.
Let’s cut the generic shed catalog jargon. This isn’t about one-size-fits-all numbers. It’s about your equipment, how you use it, and the little stuff most suppliers skip to tell you to pick the smallest possible shed to save a buck. Let’s break this down properly, no fluff.
First, start with your core assets. I always tell farmers to list every single piece of equipment they need to store, no exceptions. Don’t cut corners here—count the tractor, the header, the quad, the chainsaws, the sprayer, the slurry spreader, the utility trailer, even that old beat-up ute you only use for mustering. For each piece, grab three measurements: length, width, and height, right down to the highest point, like a header’s roof scoop or a sprayer’s boom when it’s folded. I keep a cheat sheet in my ute for this, because half the time farmers are staring at their equipment in the yard going “Uh, how tall is that thing?” If you can’t get it, pop the serial number into the manufacturer’s website—they’ll have exact specs, way better than guessing.
Next, the door size is non-negotiable. I’ve lost count of how many farmers come back to me saying, “My new tractor fits inside, but I can’t get it through the door.” That’s the mistake. A door needs to be at least 30cm wider and 20cm taller than the largest piece of equipment you’re putting through it. Let’s do an example: if your biggest gear is a 4.2m long tractor that’s 2.2m wide and 2.8m tall, your door needs to be at least 2.5m wide and 3.0m tall. Sliding doors are better for this than hinged ones, too—you don’t need clearance for the door to swing open, so you can position the shed closer to the laneway without wasting space. That’s a big one for tight farm yards.
Now, let’s talk about layout. You don’t just need to fit all your gear side by side—you need to move around it. When I design a shed with a farmer, I always leave at least 1.2m of space on all sides of every piece of equipment. That’s just enough to pull a chainsaw, change a tire, or attach a trailer without knocking something over. If you have two big pieces, like a tractor and a header, leave at least 1.8m of space between them—you’ll thank me when you’re trying to change the header’s filters at 6am on a frosty morning.
Let’s run through a couple of real scenarios, so you can see how this works in practice. First, the small hobby farm or acreage, like a 100-hectare block with a tractor, quad, utility trailer, and chainsaws. Your biggest gear here is probably the tractor, let’s say it’s 4m long, 2m wide, 2.7m tall. We’ll go with the door rule: 2.3m wide, 2.9m tall. Now, add space: 1.2m on each side of the tractor, plus space for the quad and trailer. That adds up to a shed that’s 9m wide and 15m long. Wait, some might say that’s small, but it works for most hobbyists. I put one up last year for a guy who uses it for his 4WD, his quad, and his small rotavator—he even has a little workbench in the corner for fixing fence posts. If you add a small sprayer, bump it to 10m x 16m, no problem.
Now the mid-sized grain farm, say 500 hectares, with a combine, tractor, grain cart, utility trailer, and sprayer. This is where most farmers go wrong. Their combine is the star here—let’s say it’s 12m long, 3.5m wide, 4.2m tall. Your door needs to be at least 3.8m wide and 4.4m tall. Now, add space for the auger to swing out—wait, I forgot that part! Most combines have an unloading auger that folds up for transport, but you’ll want to swing it out inside the shed to empty it after harvest, right? So you need at least 2.5m of extra length at the back of the shed to do that, no scraping the wall. Then add space for the grain cart, the tractor, and the sprayer. I always recommend 18m wide and 24m long for this size operation. That’s big, I know, but you don’t want to be moving the combine into the neighbour’s yard every harvest because you didn’t plan ahead. I had a grower in northern Victoria go for 15x20m a few years back, and he spent two harvests bending auger blades before he finally added an extension to the shed. That cost him more than the entire shed would have been the first time.
For the larger cattle or mixed farm, say 1,000 hectares, with a big tractor, slurry spreader, quad, two utes, and a workshop space. This is where you might want to think about adding a little extra, not just to fit gear, but to make the shed work for you. A lot of these farmers end up using the shed for tool storage, hay bales, even housing for a few young cattle in winter. I usually recommend 21m wide and 30m long here. That gives you space to line up all your equipment, a corner for a workbench and tools, and even room for a small stack of hay for a bad storm. I put one up for a beef farmer in South Australia last year, and he’s got so much extra space he stores his muster truck in there too—he was going to add a separate carport, but saved the money because of the extra space.
Wait, what about the common “I’ll grow into it” mistake? I hear that all the time. A farmer will say, “I’m getting a new combine next year, so I’ll build a bigger shed now.” That’s fine, but don’t overdo it to the point you’re wasting money on space you’ll never use. Let’s do the math: a 15x20m shed is about 300 square meters, and steel farm sheds run roughly $150 per square meter, so that’s $45,000. A 20x25m shed is 500 square meters, that’s $75,000—$30,000 extra for 200 square meters you might not need for five years. That’s $30,000 you could put towards new equipment, or a new ute, or fixing the fence that’s been falling down for two years. My rule here: size for what you have now, plus one future piece of equipment you know you’re getting in the next three years. No more, no less.
Another thing most suppliers don’t tell you: clearance under the roof. If your equipment has high top points, like a header with a roof scoop, you need to make sure the interior height of the shed is at least 50cm higher than the highest point of your gear. That gives you room to move the auger, add a LED light near the top, and no scraping when you’re pulling the equipment in and out. I see a lot of sheds with 3.5m interior height for headers that are 4m tall—total nightmare. You’ll be scraping the roof every time you back in, and that paintwork will chip before the end of harvest.
Also, think about access. If your shed is at the end of a tight laneway, a sliding door is better than a hinged door because you don’t need extra space to swing it open. If you have a farm with multiple access points, maybe even two smaller doors instead of one big one—so you can back the tractor in one door and the trailer out the other, no reversing down the laneway. I had a dairy farmer with 200 cows tell me that two doors cut his loading time in half for slurry spreading, and that saved him three hours a week during busy season.
Wait, what about hobby farmers who only have a small tractor and a quad? I get that too, and I don’t want to make you build a massive shed. A 9x12m shed works perfectly for that, as long as the door is sized right. I put one up for a lady in the Yarra Valley who uses it for her small orchard’s tractor, her quad, and all her fruit picking tools—she even has a little shelf for her apple picking bags. It’s not too big, not too small, exactly what she needs.
Let’s talk about the numbers in real-world terms, so you don’t have to guess. Let’s pull together the core rules I’ve learned over 12 years on farms:
- Measure your largest equipment, then add 30cm to width and 20cm to height for the door.
- Add 1.2m of space on all sides of every piece of gear for movement and maintenance.
- If you have a header or combine, add at least 2.5m of extra length to swing the unloading auger.
- Size for what you have now, plus one future piece of equipment in the next 3 years—don’t overbuild for a dream you won’t use.
- Interior height should be 50cm higher than your tallest gear to avoid scraping and add headroom.
I’ve seen farmers waste thousands of dollars building a shed that’s too small, and thousands more on a shed that’s way too big. The sweet spot is finding that middle ground that fits your current gear, leaves you room to work, and doesn’t empty your bank account.

Now, here’s the thing: every farm is different. If you’re not sure what size you need, don’t guess. Reach out, tell me what equipment you have, how you use it, and I’ll put together a custom plan for you—no pushy sales pitch, no fine print, just what works for your property. I’ve worked with hundreds of farmers across the country, so I’ve seen almost every scenario, and I can help you avoid the mistakes I’ve seen over the years. You don’t want to be the guy stuck scraping his combine’s auger at harvest time, or moving your quad into the neighbour’s shed because your door is too small. Let’s get it right the first time.
Industrial Building Solutions References:
- Australian Farm Institute, 2022. “Farm Storage and Machinery Management Report”.
- Rural Building Association of Australia, 2021. “Guidelines for Farm Shed Sizing and Clearance”.
- National Agricultural Machinery Dealers Association, 2020. “Equipment Storage Best Practices for Australian Farms”.
- Local Government Association of New South Wales, 2023. “Permitting and Size Requirements for Rural Storage Structures”.
MBA Building Solutions Pty Ltd
MBA Building Solutions Pty Ltd is one of the most professional farm sheds suppliers and builders in Australia. We are committed to providing customized building solutions for residential, commercial, industrial and agricultural applications. Welcome to buy durable farm sheds at competitive price here! Also, quotation is available.
Address: 32 Leonard Crescent, Brendale QLD 4500
E-mail: tenders@mbabuildings.com
WebSite: https://www.mbabs.com.au/