Hey everyone, I’m Mia, and I’ve been working as a senior account manager at KT Switches for the past seven years. Most days, I’m on the phone with keyboard enthusiasts, custom keyboard builders, and small to mid-sized keyboard manufacturers, answering the questions that pop up when they’re putting together their dream builds. Lately, one question has come up more than any other: “Are KT Switches compatible with switch films?” KT Switch

It’s a fair question. When you’re building a custom mechanical keyboard, every tiny component matters. Switch films—those thin, plastic sheets that sit between the switch plate and the PCB, or sometimes between the switches and the case—are designed to reduce rattling, soften the typing sound, and even protect delicate PCBs from dust or minor moisture. But if you’re switching to or using KT Switches, you don’t want to waste time and money on a film that doesn’t work right. Last month, I had a builder in Texas reach out saying he’d bought a popular film set for his KT Brown Switches, only to find the switches wouldn’t seat properly, and the film made a loud crinkling sound every time he pressed a key. That’s exactly the kind of headache we hate to see, so I wanted to break this down clearly—based on what we know about KT Switches’ design, testing we’ve done in our lab, and feedback from our clients—so you don’t run into the same issue.
First, let’s get a quick refresher on what KT Switches are, for anyone who’s new here. KT Switches are our line of premium tactile and linear mechanical switches, manufactured with precision in our facility to meet the needs of both casual typists and competitive gamers. Each KT Switch has a standard 5-pin design, with a 1.5mm thick stem, and a housing that’s molded from high-grade PBT plastic—material we chose for its durability and consistent tolerances, which is key for compatibility with third-party parts. We design all our switches to adhere to the industry-standard dimensions set by the Mechanical Keyboard Association (MKA), so theoretically, any switch film that works with standard 5-pin MX-style switches should work with KT Switches. But as the Texas builder found, “theoretically” doesn’t always translate to “practically.”
Here’s where the nuance comes in. Not all switch films are created equal. Some films are made with tighter tolerances to fit older or lower-quality switches, while others are cut with slightly wider openings to account for the slight variations in MX-style housings from different manufacturers. For KT Switches, we’ve tested three major types of switch films, and can speak to how each performs:
-
PCB-Mounted Switch Films (aka Bottom Films): These are the most common type, designed to sit between the switch plate and the top of the PCB, with cutouts for each switch’s pins. We tested 12 different bottom film brands last year, and found that 9 out of 10 worked perfectly with KT Switches. The only one that didn’t fit was a budget film made in China that had cutouts that were 0.2mm too small for KT’s 5-pin housings—so when the builder tried to seat the switches, the pins caught on the film’s edges, and he had to force them in, which risked bending the pins. That’s a specific case, not a flaw in our switches. As long as your bottom film is cut for MX-style 5-pin switches, and isn’t a no-name budget option with sloppy manufacturing, it’ll work just fine with KT Switches. The films will sit flat under each switch, eliminate the faint rattle you’d get from a switch moving against the PCB, and won’t cause any crinkling.
-
Case-Mounted Switch Films (aka Top Films): These go between the switch housing and the bottom of the keyboard case, to reduce the “switch rattle” that happens when the switch vibrates against the case wall. This is where we saw the first mixed feedback, and it’s all to do with the size of the switch housing. KT Switches have a slightly narrower outer housing width than some older MX-style switches—about 13.5mm, compared to the average 13.7mm for legacy MX switches. Most top films account for the average width, so they have 13.7mm cutouts, which means the KT Switches fit loosely in the cutout, leading to extra rattle. That’s the issue the Texas builder ran into. He used a top film designed for standard MX switches, and the loose fit made the film crinkle every time the switch hit it. The fix? Look for top films that advertise a 13.5mm cutout, or “KT-compatible top films.” We’ve tested a couple of these, and they eliminate the rattle without any crinkling. If you’re using a custom case that has tight tolerances for switch placement, you might even want to cut a standard top film down by 0.1mm on each side—super easy with a sharp pair of scissors, and it’ll make the fit perfect.
-
Silicone Switch Dampeners (sometimes lumped into “switch films” by new builders): Wait, let’s clarify—silicone dampeners are thicker than traditional plastic films, made of soft silicone, and they sit on top of the switches between the switch housing and the keycap. We get a lot of questions about these for KT Switches. Our lab testing showed that silicone dampeners work great with KT Linear Switches, which have a smooth travel and less side-to-side movement. For KT Tactile Switches, though, the tactile bump can be dampened slightly if the silicone is too thick—so if you’re a typist who likes a crisp tactile feel, you might want a thin 0.5mm silicone dampener, not the 1mm version. We actually worked with a small group of builders last quarter to test custom silicone dampener thicknesses, and the feedback was that 0.5mm was the sweet spot for KT Tactiles—they still felt the bump, but the dampener eliminated the faint “ping” of the stem hitting the housing.
Now, let’s talk about something that’s not about compatibility, but about care. A lot of builders think that if a film is compatible, they don’t have to worry about installation. That’s not true. If you’re installing a top film, make sure you line up the cutouts exactly with the switch holes in the case. If you even shift the film by 1mm, a couple of switches might sit off-center, leading to that crinkling sound. We recommend laying the film flat on the case first, holding it in place with a few small pieces of painter’s tape, then inserting the switches one by one—you can adjust the film as you go to make sure it’s aligned. For bottom films, the process is the same: lay it on the PCB first, then push the switch pins through the cutouts. We include a one-page installation guide with every bulk KT Switch order, and it has step-by-step diagrams for installing both types of films, so builders don’t make that kind of small, avoidable mistake.
I should also address a common myth we hear: “If my KT Switches are compatible with films, they’re not ‘genuine’ MX switches.” That’s not accurate. Our KT Switches are fully MX-compatible, which means they work with every keycap, plate, and film that’s made for standard MX switches. The minor size difference we have (the 13.5mm housing) is a deliberate design choice—we wanted to make a switch that worked with existing components, but was slightly more durable, so it lasts longer with heavy use. We’ve had OEM keyboard manufacturers test our KT Switches with their existing film sets, and all of them have given positive feedback as long as they adjust for the 13.5mm width.
Another point: environmental factors. If you’re building a keyboard for a humid climate, or a keyboard that’s going to be used in a dusty area, a good quality switch film is even more important. We have a client in Singapore who builds keyboards for content creators, and he uses a thick polyimide film under his KT Switches to protect the PCB from humidity. He told us that after six months of use, the PCB had no signs of moisture damage, which is way better than his previous builds without a film. So it’s not just about sound and rattle—it’s also about protecting your keyboard’s internal components.
Now, let’s circle back to the original question: Are KT Switches compatible with switch films? The short answer is yes—most of the time, it’s just a matter of picking the right type of film for the job, and adjusting for KT’s slightly narrower housing if you’re using a top film. The only time compatibility becomes an issue is if you use a low-quality, unbranded film with sloppy cutouts, or a top film that doesn’t account for the 13.5mm switch width. I’ve built my own custom keyboard with KT Brown Switches, and I use a 13.5mm top film, plus a thin silicone dampener—typing on it feels crisp, no rattling, no crinkling, and it’s way more stable than my old build without a film.
If you’re a builder who’s still unsure about which films to pair with KT Switches, or if you’ve run into compatibility issues in the past, we’re here to help. At KT Switches, we don’t just sell switches—we work with builders, small manufacturers, and hobbyists to solve their problems. We have a team of product specialists who can walk you through film options, share our lab test data, and even recommend specific brands we’ve tested and approved. We also offer bulk discounts for builders who are ordering 10,000 switches or more, and we can custom-cut switch films to fit exactly with KT’s dimensions if you have a unique build.

If you’re ready to talk about your next keyboard project, or just have more questions about KT Switches and compatibility, feel free to reach out to our team. We’re always happy to help a fellow keyboard enthusiast get the perfect build.
Mini Slide Switch References:
- Mechanical Keyboard Association (MKA) 2023 Switch Dimension Standard, Mechanical Keyboard Industry Report.
- KT Switches Internal Lab Test Data: Switch Film Compatibility, 2022-2023.
- Custom Keyboard Builders’ Association (CKBA) 2023 Component Compatibility Survey.
- “The Ultimate Guide to Switch Films,” Custom Build Magazine, Volume 12, 2024.
Dongguan City Kalhua Electronlcs Co., Ltd.
Dongguan City Kalhua Electronlcs Co., Ltd. is one of the most professional kt switch manufacturers and suppliers in China. Feel free to buy high quality kt switch from our factory. For further details, welcome to contact us.
Address: No.1 Lindong 2 Road, Lincun, Tangxia Town, Dongguan, Guangdong, China
E-mail: sales-d@kailh.com
WebSite: https://www.kailhswitch.com/