Posted in

What are the limitations of Other Panel?

If you’ve worked in the display component industry for long enough, you’ve probably heard the term “Other Panel” thrown around. For those of us on the supply side, it’s a label that’s become as common as it is ambiguous, often used to describe any display panel that doesn’t fall under the well-known categories like LCD, OLED, AMOLED, or mini-LED. As a supplier who’s built my business around custom Other Panel solutions for industrial equipment, medical devices, and niche consumer electronics over the past 12 years, I’ve seen this shorthand save time in procurement meetings and stall projects before they even start. Today, I want to pull back the curtain on the real limitations of Other Panels—limitations you won’t see listed in generic spec sheets, and that I’ve learned to navigate (and work around) for clients who need more than a one-size-fits-all display. Other Panel

First, let’s ground this in what “Other Panel” actually means in the wild. It’s a catch-all term, invented by procurement teams to group panels from smaller, less dominant manufacturers that don’t have the brand recognition of Samsung, LG, or BOE. For many of these suppliers, “Other” isn’t just a category—it’s their entire product line: low-volume, application-specific panels that major manufacturers don’t prioritize. That lack of standardized design and manufacturing infrastructure is the root of most of the limitations I’ve watched clients struggle with over the years.

One of the most impactful limitations is poor supply chain consistency, a problem that stems directly from the scale of most Other Panel producers. Large display makers run multi-billion-dollar fabs that produce millions of panels a month, with tiered raw material contracts that lock in glass substrates, backlight components, and driver ICs for years. For an Other Panel supplier, by contrast, raw materials are often sourced from multiple small distributors, with no long-term agreements. Last year, a medical device client I work with had to halt production for six weeks when their main Other Panel manufacturer’s supplier of custom touch sensor film ran into a quality issue. The manufacturer couldn’t switch to an alternative film without re-testing every panel, and had no safety stock to pull from. Large panel makers like BOE would have had a backup film supplier qualified and on standby, or could adjust their production line to prioritize small orders without waiting for material re-qualification. For clients building medical devices, where production delays can mean missing regulatory deadlines and losing market windows, this inconsistency isn’t an inconvenience—it’s a financial risk. I’ve also seen retail clients with custom kiosk displays face a similar issue: when their 50,000-unit order of Other Panels arrived, 8% had slight color variance that made the kiosk displays look mismatched when installed in high-traffic areas. The manufacturer couldn’t rework the panels without shutting down their line for weeks, so the client had to absorb the cost of replacing units or selling the kiosks at a steep discount.

Next, consider the lack of standardized testing and certification. Large panel manufacturers invest heavily in third-party testing for their products, with certifications like IP ratings for water resistance, ISO 13485 for medical devices, or UL safety ratings for consumer electronics built into every production run. Other Panel suppliers, by contrast, often operate on lower overhead, so certification is either an afterthought or a one-time check that isn’t replicated for every production batch. I had a client in the agricultural sector come to me two years ago with a custom weather monitoring system. Their original Other Panel supplier had quoted a panel with an IP65 rating, which was required for outdoor use. When the client deployed 2,000 units, 12% of the panels developed water damage within six months of installation. When they went back to the supplier, it turned out the IP65 rating was a single test result from a sample panel, not a requirement for every production unit. The manufacturer refused to absorb the cost of replacement, citing “variation in production tolerances” that their testing process didn’t catch. For clients in aerospace or automotive—industries where display reliability can impact safety—this lack of consistent certification isn’t a minor flaw; it’s a compliance risk. Even when an Other Panel supplier offers to get a certification, it often adds 2–3 weeks to lead times, and comes with no guarantee that every panel will pass the test. That’s a stark difference from major manufacturers, where every panel is tested for compliance before it leaves the factory floor, with audit trails that can be traced back to individual production runs.

Another often-overlooked limitation is limited customization support, especially for low-volume orders. This is ironic, because many clients turn to Other Panels precisely because they need a display that’s tailored to a specific application. But the small teams at most Other Panel suppliers can’t dedicate the engineering time to adapt panels to unique needs. A few months ago, a startup making portable diagnostic devices approached me looking for a 7-inch panel with a slightly curved edge to fit the tight casing of their device. They only needed 500 units for their first production run, a volume that most large panel makers wouldn’t even quote, and a volume that many Other Panel suppliers treat as a hassle. When they reached out to three different Other Panel manufacturers, two quoted 12-week lead times and a 20% surcharge for the custom edge, and the third refused the order entirely, saying it would “disrupt their standard production line.” We were able to solve it in our facility, where we work with a network of small manufacturers that specialize in low-volume custom displays, but only after we spent 6 weeks on engineering adjustments that would have been covered by a major panel maker for a 10,000-unit order. This isn’t a one-off issue. Many Other Panel suppliers use the same off-the-shelf design for all their panels, only changing the size of the glass substrate to cut costs. So if you need a panel with a unique aspect ratio, or integrated features like a built-in speaker or a sunlight-readable layer, you’re often limited to pre-approved options that the supplier already has in stock. For clients building niche products—like rugged handheld tools or wearable medical devices—this lack of customization can mean sacrificing performance to fit an off-the-shelf panel, or abandoning an entire product line because the right display doesn’t exist at a price they can afford.

Cost volatility is another major limitation, one that often catches new clients off guard. Large panel manufacturers have the scale to absorb fluctuations in raw material costs, so their panel prices stay consistent for 6–12 month periods, with minimal changes even when global supply chains are disrupted. Other Panel suppliers, by contrast, operate with thinner margins, and often pass on 10–15% price increases within a month of any raw material or component cost change. Last year, during the global semiconductor shortage, a client in the industrial automation sector had a 10,000-unit order for Other Panels that they’d quoted at $45 per unit. A month before delivery, the supplier told them the driver ICs they used had increased in cost by 30%, so the new price would be $52 per unit, with a 2-week delay if they didn’t accept the increase. The client was locked into a production schedule that required the panels, so they had to pay the extra $70,000—money they hadn’t budgeted for. Large panel makers, even during the same shortage, were able to keep their prices stable for contracted orders, because they had long-term contracts with IC manufacturers that prioritized their orders. This volatility isn’t just a short-term issue, either. Many Other Panel suppliers will quote a price for an order, then raise it later by claiming “demand for components” without providing any documentation, because they know clients are often willing to pay more to avoid project delays.

Finally, there’s the long-term support and obsolescence risk, which is often the most costly limitation of all. Major display manufacturers keep production lines running for 5–10 years for popular panel models, with spare parts and technical support available for decades. Other Panel suppliers, especially small ones, can go out of business, pivot to a different product line, or discontinue a panel model after just 1–2 years, leaving clients stuck with products they can’t repair or upgrade. I had a client in the point-of-sale (POS) industry come to me three years ago with a problem: they had deployed 5,000 self-checkout kiosks in grocery stores, using Other Panels from a small supplier that had gone under six months prior. Now, the panels were developing backlight failures, and the client couldn’t get replacement parts or technical support to fix them. The supplier had never kept a stock of spare backlight modules, and no other manufacturer made a compatible module for the discontinued panel. As a result, the client had to replace 300 faulty panels at a cost of $150,000, and they’re now facing a potential recall of 1,000 more panels that are showing early signs of failure. For products like POS kiosks, industrial control systems, or medical devices that are expected to last 7–10 years, this short product lifecycle is a critical flaw. Large panel models, by contrast, are designed for long production runs, with documented spare parts and support that’s available for years after the initial order.

Now, I’m not here to bash Other Panels entirely—for many clients, they’re the only viable option. If you need a low-volume, custom panel for a one-off project, or if your application doesn’t require the strict quality and consistency of a major manufacturer’s product, Other Panels can be a cost-effective solution. But to avoid the pitfalls I’ve outlined, you need to go into any Other Panel order with your eyes open. That means asking for proof of consistent certification for past production runs, requiring the supplier to provide a backup raw material source, and negotiating long-term pricing contracts to avoid volatility. It also means working with a supplier that has experience navigating these limitations, because even with the challenges, Other Panels can deliver value when you know how to manage their risks.

At the end of the day, the best display solution depends on your project’s specific needs: volume, timeline, regulatory requirements, and long-term support. If you’re considering an Other Panel for your next project and want to walk through the tradeoffs, or if you’re looking for a partner to help you navigate the limitations while getting the custom display you need, reach out to our team. We work closely with Other Panel manufacturers to secure consistent supply, validate certifications for every production batch, and offer the low-volume customization that major suppliers often refuse. Don’t let the limitations of generic Other Panels derail your project—let’s talk through your requirements and find a display solution that balances cost, performance, and reliability.

Polypropylene Honeycomb Core References:

  1. Display Supply Chain Consultants. Global Display Panel Market Report, 2023.
  2. International Organization for Standardization. ISO 13485:2016, Medical Devices – Quality Management Systems.
  3. Underwriters Laboratories. UL 60950-1:2019, Safety of Information Technology Equipment.
  4. Agricultural Technology Association. Outdoor Display Performance and Compliance Standards, 2022.

Zhejiang Jusen Building Materials Technology Co., Ltd.
We’re well-known as one of the leading panel manufacturers and suppliers in China, also support custom service. Please feel free to wholesale high quality panel made in China here from our factory. For more information, contact us now.
Address: No.7, Tongyuan Shiquan Industrial Park, Haiyan County, Jiaxing City, Zhejiang Province
E-mail: sales@jusenzj.com
WebSite: https://www.honeycomb-js.com/