Posted in

How to measure the efficiency of a used excavator?

Hey there, if you’re here, chances are you’re either in the market for a used excavator, or you’re just weirdly obsessed with how these heavy machines work (no judgment—we’ve all got our things). As a used excavator supplier who’s been in this game for over 12 years, I can’t tell you how many times I’ve heard guys show up, check the dirt under the tracks, pat the cab like it’s a old dog, and call it “good” or “bad” without actually measuring what matters. Look, excavators aren’t fashion pieces—their efficiency is what’s gonna make or break your project, your schedule, and your wallet. I’m gonna break this down real, no-BS style, so you don’t waste cash on a machine that’ll leave you stranded mid-dig. Used Excavator

First off, let’s get one thing straight: “efficiency” here isn’t just how fast it digs. It’s the total package—fuel use, downtime, how hard it works when you ask it to, and even how easy it is to fix when something goes south. A lot of used excavators look fine on the outside but are eating fuel like it’s going out of style, which kills your bottom line before you even finish the first job. So let’s start with the first real measurement: Fuel Efficiency, and no, you can’t just guess by how much you put in.

Here’s the trick I teach every buyer who walks through our yard: do a 4-hour test dig on a consistent job site—like a flat patch of dirt that’s all the same type (clay is fine, gravel is better, just don’t switch mid-test). Fill the tank all the way up, mark the exact level (not just “full” at the pump—use the dipstick, or the gauge, but make sure it’s dead on), then run it for exactly 4 hours doing what you’d actually use it for: digging, swinging, dumping into a truck, all that. No idling (we’ll talk about idling later), no overworking it, just normal work. After 4 hours, fill it back up and see how much fuel you used. Let’s say it took 12 gallons for 4 hours— that’s 3 gallons an hour. If another machine takes 10 gallons for the same time, that’s 2.5 gallons an hour, which is way better. Most mid-size excavators (the 10-20 ton ones, which are the workhorses for most small to midsize jobs) should get between 2.2 and 3 gallons an hour on a real job. If it’s way over that, something’s wrong—maybe a clogged fuel injector, worn engine parts, or even a hydraulics leak that’s making it work harder than it needs to. And before you say “well new excavators get better fuel,” yeah, they do, but they cost twice as much. A good used one can be 30-50% cheaper, and if its fuel use is only 10% higher than a new one, that’s still a win over 5 years. I’ve seen guys skip this test and end up paying an extra $500 a month just for gas—total rookie move.

Next up, Digging Cycle Time. This is a big one, because it directly translates to how much work you get done in a day. What’s a digging cycle? It’s the full sequence: dig into the dirt, lift the bucket, swing 90 degrees to a dump truck, dump the dirt, swing back, lower the bucket, and get ready for the next dig. For most mid-size machines, a good cycle time is between 18 and 25 seconds. If it’s taking 30+ seconds, that’s a problem, and it’s not just the engine—it could be hydraulics, worn bucket pins, or even the swing motor. How do you measure this? Again, do a test run, count 10 full cycles, average the time. If it’s averaging 22 seconds, that’s solid. If it’s 28, you’re losing almost 10 seconds per cycle, which over 8 hours of work is 240 cycles— that’s almost an hour of lost time every day. I had a customer last year who bought a excavator that looked perfect, but his cycle time was 32 seconds. He thought it was just “how used machines are,” but a quick check showed the swing motor was worn out, and a $1,200 fix got it down to 21 seconds. That small fix made him an extra 2 days of work on his first job—way more than the cost of the machine. Also, pay attention to how it handles the load: if when you lift a full bucket, it lurches or drops a little, that’s a hydraulic issue, not a power issue, and that’ll kill efficiency too.

Now, let’s talk about downtime—wait, is that even a measurement of efficiency? Hell yeah it is. An excavator that’s down 2 days a week because it’s leaking fluid, or the starter’s bad, or parts are impossible to find is not efficient, no matter how fast it digs. How do you measure downtime when you’re buying a used one? First, ask the seller (that’s us, hi) for the maintenance records. If the previous owner kept records, that’s gold. Look for things like oil changes—did they do them every 250 hours, which is standard for most excavators? If they only did them every 500 hours, the engine’s probably got wear and tear, which leads to breakdowns. Also, check for common issues for that make and model. For example, some older Kobelco models have a history of overheating, some Komatsu ones have hydraulic valve problems. Do a quick Google (wait, no, don’t Google—ask someone who actually works on these machines, like your local heavy equipment mechanic, or us) about that specific model’s common issues. Another thing: idling time. Excavators idling all day aren’t working, they’re burning fuel for nothing. A good used excavator should have less than 20% of its total operating time as idling. If the hour meter says 5,000 hours, and the idle meter (most newer ones have this) says 1,500, that’s 30% idling— that means the previous owner ran it like it was a lawn mower, not a workhorse. That’s a waste of fuel and leads to more engine wear. We always tell buyers: ask for the idle hours, or if there’s no idle meter, watch the machine work for 30 minutes and see how much it’s idling vs. working. If it’s idling half the time, pass unless the price is so good it covers fixing the idling issue.

Hydraulic efficiency is another big one, and it’s easy to miss. The hydraulics are what power the arm, bucket, swing, everything. If the hydraulics are inefficient, the machine feels “sluggish” even when the engine is running fine. How do you test this? Do a “simultaneous operation” test—try to do two things at once, like lift the arm and swing at the same time, or dig while moving the bucket. A good excavator should do both smoothly, no sputtering, no delay, no one function taking over. If when you do that, the engine lurches and one function slows way down, that means the hydraulic pump is worn, and that’ll kill your cycle time and waste fuel. I once had a guy test an excavator, and when he tried to lift the arm and swing, the swing stopped dead. We fixed the hydraulic pump for $1,800, and he was happy, but if he’d skipped that test, he’d have been stuck with a machine that couldn’t do two jobs at once, which is basically useless for most sites. Also, check for hydraulic leaks—even a small leak is a sign the seals are worn, and over time, that’ll turn into a big leak, wasting fluid and making the hydraulics work harder. We always pressure-wash the undercarriage of our used excavators before a test, so you can actually see if there are leaks—no hidden gunk covering them.

Wait, what about undercarriage efficiency? A lot of new buyers forget about the tracks and the rollers, but that’s a huge part of how the machine moves. If the undercarriage is worn, the excavator is burning extra fuel just trying to move itself. How do you measure that? First, check the track tension—if the track is too loose, it’ll slip, if it’s too tight, it’ll put extra stress on the engine. The rule of thumb is: when the track is sitting flat, you should be able to push it up 1-2 inches from the bottom of the undercarriage. If it’s more than 2 inches, it’s too loose, if it’s less than an inch, too tight. Then, check the wear on the tracks and rollers—for mid-size excavators, the tracks should have at least 50% tread left, and the rollers and sprockets shouldn’t have excess play. If the undercarriage is worn out, replacing it can cost $5,000-$10,000, which eats into any savings you got from buying a used machine. We always do a full undercarriage inspection on every excavator we sell, and we note the wear in our listings—no surprises, because we hate surprises as much as our customers do.

Oh, and one thing no one talks about: operator comfort, which actually ties into efficiency too. Wait, what? If the cab is noisy, or the controls are stiff, or the seat is uncomfortable, the operator is gonna get tired faster, make more mistakes, and work slower. That might not sound like a big deal, but over a 10-hour day, a tired operator can lose an hour of work time. When you test the machine, sit in the cab, move the controls for 5 minutes, see how they feel. If they’re stiff, that’s a sign of worn hydraulics or linkage. If the seat is beat up, or the AC (if it has one) doesn’t work, that’s gonna be a problem in the summer or winter. I’ve had operators tell me they refused to work on a certain machine because the seat was so bad, so that’s a real thing, not just a luxury.

Now, let’s cut to the chase: when you’re measuring all this, you don’t need fancy tools. You can do all of this with a stopwatch, a dipstick, and a good eye. You don’t need to be a mechanic to figure this out. The biggest mistake I see buyers make is looking only at the hour meter. “Oh, it’s only got 3,000 hours, that’s low!” Yeah, but if those hours are all idling, or the fuel use is terrible, or the hydraulics are shot, 3,000 hours is worse than a machine with 6,000 hours that was well-maintained. Hour meters are a starting point, not the final word. We’ve had customers buy a machine with 4,500 hours that ran like a top, and another with 2,800 hours that had a blown engine because the previous owner never changed the oil.

At the end of the day, efficiency for a used excavator is about getting as much work as possible for your money, without hidden costs. Whether you’re a general contractor with a big job, a landscaper doing small digs, or someone who’s just starting out, you need a machine that won’t leave you hanging. We’ve been in the used excavator game for years, and we don’t just sell machines—we help guys pick the right one, because if you do well, we do well too.

If you’re ready to stop guessing and start looking at real efficiency numbers, reach out to us. We’ll walk you through every test, show you maintenance records, and let you run any test you want on any excavator in our yard. No pressure, no games—just straight talk about what works and what doesn’t. Don’t waste another dollar on a excavator that looks good on the outside but drains your wallet on the inside.

Side Board Semi Trailer References:

  1. Heavy Equipment Manufacturers Association. (2022). Used Excavator Efficiency Benchmarking Guidelines for Construction Applications.
  2. National Asphalt Pavement Association. (2021). Performance Metrics for Compact and Mid-Size Excavators in Residential and Commercial Projects.
  3. International Union of Operating Engineers. (2020). Best Practices for Testing Used Construction Equipment for Fuel and Hydraulic Efficiency.
  4. EquipmentWatch. (2023). Used Excavator Undercarriage Wear and Downtime Correlation Study.

Heavy Leading Company Limited
Heavy Leading Company Limited is one of the most experienced used excavator manufacturers and suppliers in China, featured by quality products and low price. Welcome to buy discount used excavator in stock here and get pricelist from our factory. We also accept customized orders.
Address: Guotang, Quanpu, Liangshang, Jining City, China
E-mail: truckalex@heavyleading.com
WebSite: https://www.truckalex.com/