Posted in

How to store wooden dining chairs in winter?

Hey everyone, it’s Jake here, and if you’re a wooden dining chair supplier—like me—you know winter isn’t just for cozy dinners and hot cocoa. It’s also the trickiest season for storing those chairs, right? Last year, I almost messed up a batch of premium solid oak chairs we were keeping for a holiday restock because I skipped a few key steps. The heating kicked on super hard in our warehouse, the dry air shrank the legs a tiny bit, and I had to spend a whole weekend sanding and refinishing to fix it. Not fun, and definitely not something I want to happen again this year. Wooden Dining Chair

So today, I’m sharing what I’ve learned over 8 years of shipping wooden dining chairs, plus the science-backed tricks I picked up from a woodworking buddy who restores antique furniture. This is stuff that works for both storing chairs at your warehouse (if you’re a supplier like me) or even storing extra chairs at home, but I’ll lean into the supplier side since that’s my lane. Let’s dive in.

First, let’s talk about why winter is such a pain for wood. You might’ve noticed that wooden stuff cracks or warps this time of year, and it’s not just cold— it’s humidity. Winter air is naturally dry, and indoor heating makes it even worse. Wood is hygroscopic, meaning it absorbs or releases moisture to match the air around it. If the air inside your storage space is too dry (like, below 30% relative humidity), the wood will lose moisture, shrink, and develop gaps between the seat and legs, or even tiny cracks in the legs. If you stored chairs near a window that’s drafty, that uneven drying makes it way worse—one side of the chair dries faster than the other, so it warps.

Wait, I’ve seen suppliers just stack chairs against a wall in the warehouse and call it a day. Don’t do that. Even if the air temp is consistent, stacking too tight traps moisture between the chairs. Those gaps between the seats and backs? They hold condensation, especially if the warehouse has any overhead pipes that sweat in cold weather. Mold and mildew can set in fast, and by spring, you’ve got a batch of chairs that look like they spent a year in a damp basement.

Let’s break this down step by step, starting with pre-storage prep. This is non-negotiable for me now, because fixing a chair after the fact is way more expensive than doing it right upfront. First, give every chair a quick clean. Dirt and dust hold moisture, so wipe down seats, legs, and the back slats with a soft, slightly damp cloth—no harsh chemicals, just a tiny bit of mild soap if there’s a sticky spot. Then, dry them completely with a microfiber towel. No wet surfaces left, ever.

Next, check for any small issues before storing. If a chair has a loose leg, tighten it with a wood glue suitable for furniture (not regular white glue) and clamp it overnight. If there’s a scratch on the finish, touch it up with a matching wood pen—exposed wood will absorb moisture more, so it’s a ticking time bomb. Last year, I skipped this on 12 walnut chairs, and three of them got tiny surface cracks because the finish wore thin. Total waste.

Now, the storage space itself. If you’re a supplier, you’re probably using a warehouse, garage, or maybe a climate-controlled unit. Let’s start with the basics: humidity is king. For solid wood dining chairs, you want relative humidity between 40% and 50% year-round, but winter is when this is hardest to hit. Most warehouses in cold climates drop to 25% or lower once heating kicks on. So how do you fix that? For smaller spaces (like a 10×10 storage closet for extra inventory), I use 50-pound bags of silica gel. They’re cheap, non-toxic, and you can reuse them by baking them in the oven once a month. Place one small bag per 10 chairs, set them on the floor or a low shelf, not directly on the chairs. If you’re working with a bigger warehouse, a whole-house humidifier (the industrial kind) is the way to go. I installed a 50-gallon humidifier in my main storage bay two years ago, and the shrinkage issue? Gone.

Wait, don’t forget temperature. Wood hates extreme swings, right? If your warehouse drops to 30 degrees at night and jumps to 75 during the day when the heating runs, that’s bad. Aim for a consistent temp between 60 and 68 degrees Fahrenheit. If you can, insulate the walls or add a small space heater (but keep it away from the chairs—no open flames near wood finish!). Also, avoid storing chairs near windows, exterior doors, or overhead lights that get direct sun. Sun fades wood finish way faster in winter, and the cold draft from windows dries out the sides of chairs unevenly.

Now, how to arrange the chairs. This is where a lot of suppliers mess up. Let’s start with stacking: never stack chairs directly on top of each other, unless you add a protective layer between them. If you stack a chair’s seat on another’s back, the finish on both can scratch, and the weight can bend the legs of the bottom chair. I use these thin, reusable foam sheets (the kind you get for moving furniture) between every chair when stacking. If you don’t have those, a layer of brown craft paper works—just make sure it’s not glossy, because glossy paper can leave a residue on the finish.

If you’re not stacking, arrange them so there’s at least 2 inches of space between each chair. That lets air circulate, so no condensation gets trapped. Also, never lean chairs against a cold exterior wall. I learned this the hard way last winter when a new part-timer stacked 20 chairs against the back warehouse wall, which gets frosty. By the time I found them, the legs on the cold side were 1/8 inch narrower than the front, and they wouldn’t fit through door frames. Total loss, and I had to discount them 50% to sell. So always keep chairs at least 12 inches away from any exterior walls, pipes, or sources of moisture.

What about extra chairs you might have at home, like sample chairs for your office? Same rules apply. If you’re storing them in a basement, make sure the basement has a dehumidifier—basements get damp in winter, and that’s just as bad as dry air. I once stored a sample set in my basement and came back to a chair with a fuzzy green spot on the back. Gross, and I had to replace it.

Another trick: add a wood moisture meter to your routine. They’re cheap—like $20 on Amazon—and let you check the moisture level of the chairs before storing it. The ideal range for dining chairs is 6% to 8% moisture content. If it’s lower than 5%, that means the air is too dry, and you need to add moisture with that humidifier or silica gel. If it’s higher than 10%, the chair has too much moisture, so leave it in a dry space for a few days before storing—otherwise, it’ll warp when it heats up.

Wait, what about metal accents? A lot of our chairs have metal screws or decorative metal parts, right? Winter’s dry air is also bad for metal—it can rust if there’s any residual moisture. After cleaning, wipe any metal parts with a tiny bit of mineral oil, and that forms a thin barrier against moisture. I do this for all chairs before storing, and I haven’t had a rusted part in two years.

Now, what about longer-term storage—like if you’re putting chairs away for 3+ months over winter, instead of just a few weeks? A lot of suppliers store holiday inventory this way. For that, I wrap each chair in a breathable furniture cover, not plastic. Plastic traps moisture, so even if you wrapped a clean, dry chair, condensation builds up inside the plastic and causes mold. Breathable covers (the ones made of cotton or poly-cotton) let air circulate, but keep out dust and drafts. I buy bulk covers from a restaurant supply company, since we go through a lot of them.

Also, if you’re storing chairs on pallets, make sure the pallets are dry and off the floor. Concrete floors in warehouses sweat a lot in winter, especially if it’s cold. Storing chairs directly on concrete means they’re sitting in dampness, even if the air above is dry. I use wooden pallets that have been treated to resist moisture, and I put a thin plastic sheet (with small holes for airflow) between the pallet and the concrete. That way, the wood doesn’t pick up moisture from the floor.

Let’s talk about mistakes to avoid, because I’ve made almost all of these. First, don’t use too much humidifier. If the humidity is over 55%, the wood will absorb too much moisture, swell, and the joints will loosen. I check the humidity twice a day—morning, when the warehouse is cold, and afternoon, when the heating is running—so I don’t overdo it. Second, don’t store chairs with other furniture that might give off fumes. Paint, new fabrics, even some cleaning products off-gas in winter, and those fumes can damage the wood finish. I keep my chair storage bay separate from my fabric sample bay for that reason. Third, don’t forget to rotate the chairs every month if they’re not moving. Even if they’re stacked, rotating a few times lets each side get air, so no one side dries out faster than the other.

Now, what about when spring comes? Don’t just pull them out and send them to customers. Let them acclimate to the new humidity for 2 to 3 days. Bring them into the showroom or a semi-warm space, leave the covers off, and let them adjust. That prevents cracking when the air gets more humid. I always tell my team to test a few chairs first before shipping big orders—just to make sure there’s no warping or shrinkage after storage.

For all my fellow wooden dining chair suppliers out there, these steps aren’t just about saving chairs—they’re about saving money. I used to lose 8-10% of my inventory each winter to bad storage, and now that I’ve been doing this the right way, that number’s down to less than 1%. That’s a huge difference for a small business like mine.

If you’re looking for more tips on maintaining wooden chairs year-round, or if you’re ready to order bulk wooden dining chairs and talk about storage solutions that work for your space, don’t hesitate to reach out. I’m always happy to chat with other suppliers, swap war stories, and help you avoid the mistakes I made. We’ve built our business on making chairs that last, and part of that is taking care of them even when they’re not in use.

Adjustable Gaming Table References:

  1. Forest Products Laboratory. (2010). Wood Handbook: Wood as an Engineering Material. U.S. Department of Agriculture.
  2. American Woodmark. (2021). Seasonal Care for Solid Wood Furniture. Furniture Industry Research Association.
  3. Fine Woodworking. (2022). Humidity and Wood: How to Control Moisture for Longevity. Taunton Press.
  4. Restaurant Supply Magazine. (2023). Bulk Storage Solutions for Commercial Furniture Inventory. National Restaurant Association.

Huzhou Xiasen Import and Export Co., Ltd.
Huzhou Xiasen Import and Export Co., Ltd. is one of the most experienced wooden dining chair manufacturers and suppliers in China, also supports customized service. We warmly welcome you to buy durable wooden dining chair in stock here from our factory. If you have any enquiry about pricelist, please feel free to email us.
Address: Room 701-9, No.70, Wulipai Road, Wukang Subdistrict, Deqing County, Huzhou City, Zhejiang Province
E-mail: shinesunyoungcai@163.com
WebSite: https://www.shinesun-household.com/