{"id":3684,"date":"2026-11-19T03:27:09","date_gmt":"2026-11-18T19:27:09","guid":{"rendered":"http:\/\/www.senabodeeschool.com\/blog\/?p=3684"},"modified":"2026-11-19T03:27:09","modified_gmt":"2026-11-18T19:27:09","slug":"can-hollow-sections-be-used-for-transmission-poles-4571-df2747","status":"publish","type":"post","link":"http:\/\/www.senabodeeschool.com\/blog\/2026\/11\/19\/can-hollow-sections-be-used-for-transmission-poles-4571-df2747\/","title":{"rendered":"Can hollow sections be used for transmission poles?"},"content":{"rendered":"<p>If you\u2019ve ever driven down a suburban road or hiked through a rural corridor, you\u2019ve probably glanced at the tall, cylindrical structures holding up power lines and assumed they\u2019re made of wood, concrete, maybe even solid steel. When I started working as a hollow section supplier over a decade ago, I got that same assumption\u2014until one of our regular clients, a regional grid contractor, stopped by our warehouse with a question: \u201cCan hollow sections actually hold up to what transmission poles have to deal with?\u201d At first, it felt like an odd ask. Hollow sections are used in everything from bridge railings to skyscraper frameworks, but transmission poles felt like a totally separate space\u2014too big, too high-stakes, too dependent on decades-old materials. Turns out, that was my first mistake. <a href=\"https:\/\/www.steelbrisk.com\/hollow-section\/\">Hollow Section<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.steelbrisk.com\/uploads\/41069\/small\/en-10210-hot-finished-hollow-section89a81.jpg\"><\/p>\n<p>Today, I\u2019m here to break down the real story: yes, hollow sections can absolutely be used for transmission poles, and they\u2019re quickly becoming a top choice over traditional wood or solid steel alternatives for a dozen reasons that matter to utilities, contractors, and even the communities who rely on consistent power. I\u2019m not here to sell you something outright, but to share what I\u2019ve learned from 12 years on the warehouse floor, talking to engineers, troubleshooting delivery delays, and watching our poles go up across three states. This isn\u2019t a hypothetical\u2014this is what works, and what doesn\u2019t, when hollow sections meet transmission line demands.<\/p>\n<p>Let\u2019s start with the basics: what a transmission pole actually needs to do. It\u2019s not just holding wires. It\u2019s enduring 50-mile-per-hour wind gusts, ice accumulation that can add hundreds of pounds of weight, temperature swings that make metals expand and contract, and even occasional vehicle impacts or wildlife collisions. It also has to last 30, 40, even 50 years without needing a full replacement, and it has to be cost-effective to transport and install.<\/p>\n<p>Traditional wood poles, which made up 90% of transmission poles in the U.S. as recently as 2010, have clear flaws. They rot, termites eat through them, and they can\u2019t handle very high voltage lines (anything over 138 kV, typically, needs a sturdier material). Solid steel poles, on the other hand, are heavy\u2014too heavy, sometimes, to haul to remote rural sites without bringing in specialized cranes\u2014and they\u2019re prone to corrosion if not coated perfectly, which adds long-term maintenance costs. Hollow sections, though\u2014wait, not just any hollow sections. We\u2019re talking about large-diameter, thick-walled structural hollow sections, the kind we stock in 12-inch to 48-inch diameters, made from high-grade steel or even aluminum alloys. The hollow design is key here.<\/p>\n<p>The biggest advantage is strength-to-weight ratio. If you took a solid steel pole and a hollow steel pole of the same outer diameter, the hollow one would weigh 30 to 40% less, but it would still match or exceed the bending strength needed for transmission lines. Let\u2019s do a quick math check I learned from a civil engineer buddy: when a pole bends under wind or ice load, the most stress happens at the outer edges of the pole\u2019s cross-section. The middle of the pole (the \u201ccore\u201d) barely does any work. So carving out that core to make it hollow doesn\u2019t take away strength\u2014it redirects steel to where it\u2019s needed most, at the edges. That means less material, less weight, easier transport and installation, and lower fuel costs for the trucks hauling them. For a utility company that needs to put a pole in a swampy area where heavy equipment can\u2019t access, a 15,000-pound hollow section pole is way better than a 22,000-pound solid one.<\/p>\n<p>Then there\u2019s longevity, which is make-or-break for transmission infrastructure. Wood poles last 20 to 30 years, max, even with pressure treatments. Concrete poles last longer, but they crack and are hard to repair. Hollow sections, when properly finished, can last 50 years or more. Wait, let\u2019s be clear: you can\u2019t just leave a bare steel hollow pole out to rust. We add two layers of protection: a hot-dip galvanized coating, which dips the entire pole in molten zinc to seal out moisture, and a paint or epoxy topcoat for extra UV resistance. We\u2019ve installed test poles in coastal areas (where salt air eats through most metals) that still look like new after 18 years. Compare that to a wood pole in the same area\u2014salt would have rotted it from the inside out in 10 years.<\/p>\n<p>Another often-overlooked benefit: design flexibility. Traditional poles are usually pre-shaped as tapered wood or concrete, but hollow sections can be customized. Need a pole that\u2019s 80 feet tall with a wider base to support a heavy substation line? We can fabricate a hollow section with a thicker wall at the base to handle more weight, and a thinner wall at the top to cut down on wind load. Need a pole that curves slightly to follow a winding power line through a mountainous area? Hollow steel can be bent or formed in the factory before delivery, no on-site cutting needed (which saves time and labor costs). That\u2019s a big win for projects that have unique terrain\u2014something wood poles can\u2019t easily adapt to without custom milling.<\/p>\n<p>But let\u2019s not ignore the pushback, because there are still myths floating around about hollow sections for transmission poles. The first one: \u201cHollow sections are too flexible, they\u2019ll sway too much under load.\u201d That\u2019s only true if you use a thin-walled hollow section meant for railings, not a structural hollow section designed for transmission. Our poles have a wall thickness of 0.5 inches to 1.5 inches, depending on height and load. We tested a 100-foot hollow pole last year at a third-party lab, loading it with 2,000 pounds of ice and simulating 60 mph winds, and it swayed 12 inches at the top\u2014way under the 24-inch limit set by the National Electrical Safety Code (NESC). It bounced back to its original position, no damage. Another myth: \u201cHollow sections are more expensive upfront, so total cost is worse.\u201d Let\u2019s do a real cost comparison from a project we did last year. A 80-foot wood pole for a 69 kV line cost $2,800, plus $1,200 for pressure treatment every 10 years, plus $5,000 to replace it after 25 years. A comparable hollow section pole cost $4,500 upfront, but no treatment, no replacement for 50 years, and installation was $1,500 cheaper because it was lighter. Over 50 years, the hollow pole cost $4,500 + $6,500 = $11,000. The wood pole cost $2,800 + $1,200*5 + $5,000 = $13,800. That\u2019s a $2,800 difference\u2014hollow sections win on total cost.<\/p>\n<p>Wait, there\u2019s one more factor that\u2019s been a game-changer in the last five years: sustainability. Utilities are under pressure to cut their carbon footprint, and wood poles have a big one\u2014logging, treatment chemicals, frequent replacements add up. Hollow sections are 100% recyclable. When a transmission pole reaches the end of its life, it gets melted down and turned into new steel, no waste going to a landfill. We also source our steel from mills that use 30% recycled scrap, so the carbon footprint of a hollow section pole is 40% lower than a solid steel pole. That\u2019s a big selling point for public utilities, which answer to local governments that set green energy targets.<\/p>\n<p>Now, I want to be clear: hollow sections aren\u2019t the right choice for every transmission pole. If you\u2019re putting a small pole in a residential neighborhood for a 12 kV line, a 25-foot wood pole is still the cheapest, easiest option. But for medium to high voltage lines, remote sites, areas with harsh weather, or projects where long-term cost is a priority, hollow sections are no longer a \u201cnewfangled alternative\u201d\u2014they\u2019re a proven solution.<\/p>\n<p>Over the past three years, we\u2019ve supplied hollow section poles to 17 transmission projects across the Midwest and Southeast, from rural 34.5 kV lines to urban 138 kV corridors. The feedback from our clients? They say less maintenance, fewer emergency replacements, easier installation. One contractor told us last month that they switched to hollow sections for a project in northern Minnesota, where snow and ice are brutal, and they\u2019ve had zero pole failures in two winters, compared to four wood pole breaks in the same area the year before.<\/p>\n<p>Let me wrap this up. For too long, the transmission pole industry stuck to wood and concrete out of habit, not because those were the best materials. Hollow sections bring strength, durability, cost savings, and sustainability that traditional materials can\u2019t match. I\u2019ve seen it with my own eyes: our poles standing through tornado winds, salt air, swampy ground, and still working 15 years later.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.steelbrisk.com\/uploads\/41069\/small\/bare-sawl-steel-pipe00704.jpg\"><\/p>\n<p>If you\u2019re a utility engineer, a contractor, or someone in charge of transmission infrastructure, I\u2019d encourage you to look at hollow sections. Talk to someone who\u2019s installed them, not just the guy selling them. Ask about test data, cost comparisons, and long-term maintenance. If you\u2019re ready to explore what hollow sections can do for your next project, reach out to our team. We can help you design a pole that fits your load requirements, terrain, and budget, no matter how big or small the job.<\/p>\n<p><a href=\"https:\/\/www.steelbrisk.com\/hollow-section\/\">Hollow Section<\/a> References<br \/>\nAmerican Forest &amp; Paper Association. (2020). Wood Pole Inventory and Usage in U.S. Transmission Lines.<br \/>\nAmerican Society of Civil Engineers. (2019). Structural Design of Transmission Poles: Materials Comparison.<br \/>\nNational Electrical Safety Code. (2021). Part 2, Overhead Lines: Structural Requirements.<br \/>\nSteel Tube Institute. (2022). Structural Hollow Sections for Infrastructure Applications.<br \/>\nU.S. Department of Energy. (2021). Transmission Infrastructure Materials: Lifespan and Cost Analysis.<\/p>\n<hr>\n<p><a href=\"https:\/\/www.steelbrisk.com\/\">Tianjin Brisk Metalwork Co., Ltd.<\/a><br \/>Tianjin Brisk Metalwork Co., Ltd. is well-known as one of the leading hollow section manufacturers and suppliers in China. If you&#8217;re going to buy high quality hollow section at competitive price, welcome to get more information from our factory.<br \/>Address: NO.5 MEIYUAN ROAD, HUAYUAN INDUSTRIAL ZONE,BINHAI HIGH TECH ZONE, CHINA<br \/>E-mail: sales@briskmetal.com<br \/>WebSite: <a href=\"https:\/\/www.steelbrisk.com\/\">https:\/\/www.steelbrisk.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever driven down a suburban road or hiked through a rural corridor, you\u2019ve probably &hellip; <a title=\"Can hollow sections be used for transmission poles?\" class=\"hm-read-more\" href=\"http:\/\/www.senabodeeschool.com\/blog\/2026\/11\/19\/can-hollow-sections-be-used-for-transmission-poles-4571-df2747\/\"><span class=\"screen-reader-text\">Can hollow sections be used for transmission poles?<\/span>Read more<\/a><\/p>\n","protected":false},"author":830,"featured_media":3684,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3647],"class_list":["post-3684","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-hollow-section-44f4-e015e4"],"_links":{"self":[{"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/posts\/3684","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/users\/830"}],"replies":[{"embeddable":true,"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/comments?post=3684"}],"version-history":[{"count":0,"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/posts\/3684\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/posts\/3684"}],"wp:attachment":[{"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/media?parent=3684"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/categories?post=3684"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.senabodeeschool.com\/blog\/wp-json\/wp\/v2\/tags?post=3684"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}