If you’ve ever pulled water from a well to water your garden, fill your swimming pool, or keep your home supplied during a grid outage scare, you know how essential that underground water supply is. But if you’re weighing solar power for your home or farm, you might’ve stumbled on a question that stumps a lot of well owners: Can I actually run my well pump with on-grid solar without running into issues? As someone who’s worked as an on-grid solar supplier for over a decade, I’ve answered this question so many times—from suburban homeowners with 200-foot wells to small-scale family farms with 500-foot deep wells. The short answer is yes, you absolutely can. But there are a few key details you need to get right to make sure your system works reliably, saves you money, and doesn’t leave you high and dry. Let’s break this down, plain and simple, no overcomplicated jargon. On Grid

First, let’s get clear on what an on-grid solar system actually is, and how it pairs with a well pump. Unlike off-grid systems, which need bulky batteries to store extra power for cloudy days, on-grid systems tie directly to your local utility’s power lines. Any extra solar power your panels make during the day feeds back into the grid, and you draw power from the grid when your panels aren’t making enough—like at night or on overcast days. Most utilities offer net metering, which credits you for that extra power, so it’s like getting paid to run your well on solar when you don’t even need all the power for your home. That’s a huge win for well owners, because well pumps are one of the most power-heavy appliances in your home. A standard residential well pump uses between 500 and 1,500 watts, and deep-well pumps (common for rural areas) can use 2,000 to 5,000 watts—so they eat up a noticeable chunk of your monthly electricity bill.
The biggest myth I hear from well owners is that solar can’t handle a well pump, or that you’ll run out of water on cloudy days. That’s only true if you install the wrong size system, or don’t account for how your well pump works. Let’s talk about the main types of well pumps, because that’s where most of the planning happens. There are two primary types: submersible pumps, which are placed down in the well casing and push water up to your home, and jet pumps, which are usually above ground and pull water up from the well. Submersible pumps are way more common for deep wells (over 25 feet), and they’re the easiest to pair with on-grid solar—so if you have a jet pump, don’t panic, we can work with that too.
Now, the critical part: sizing your solar system to match your well pump’s needs, not just your home’s. A lot of people make the mistake of sizing their solar system to cover their fridge, lights, and AC, and then wonder why their well pump keeps tripping the breaker. Well pumps aren’t like your TV, which uses a steady 100 watts when you’re watching it. Well pumps have a startup load—aka “surge power”—that’s two to three times their running wattage. That’s the kicker. A 1,000-watt well pump might only use 1,000 watts to run, but it needs 2,500 to 3,000 watts to kick on in the first second. If your solar system can’t deliver that startup surge, it’ll trip the inverter, which is the device that turns your panels’ DC power into AC power your home uses. That’s a problem I see all the time with homeowners who cut corners on their solar quote, or use a system that’s too small for their well.
So how do we fix that? First, we audit your well’s specific details. I’ll ask for two things: your pump’s running wattage (that’s usually on the pump’s motor label, or in your well’s original paperwork) and your average daily water use. A family of four uses about 300 to 500 gallons of water a day, and a small farm might use 1,000 to 3,000 gallons. If you’re using your well for irrigation, that number can jump even higher, but the good news is you’re probably using the most water during the day—exactly when your solar panels are making power. That’s not a coincidence; it’s the perfect overlap. Most well owners run their pumps when they’re home, watering yards or filling pools during the daytime, so you’re already using power when your solar is most productive.
Next, we size the inverter to handle that surge load. On-grid inverters come in different sizes, and we don’t just pick one that matches your home’s total power use. We make sure the inverter has enough “surge capacity” to handle your pump’s startup load. For example, if your well pump has a 3,000-watt startup load, we’ll either size your inverter to handle that, or add a small extra buffer to your system’s total wattage to cover it. I recently worked with a homeowner in central Ohio who had a 2,800-foot deep well with a 4,500-watt submersible pump. His first quote from another company was a 10-kilowatt system, which worked for his home’s needs but couldn’t handle the pump’s startup load. We adjusted it to a 12-kilowatt system with an inverter that had a 10,000-watt surge capacity, and now he runs his entire home and his well pump on solar, with almost zero monthly electricity bills. He even sells extra power back to the utility in the summer when he’s watering his vegetable garden.
Another common question: What if I have a very deep well, or a high-flow well pump? Can on-grid solar handle that too? The short answer is yes, but it’s just a matter of scaling the system to match. We’ve installed systems for wells over 500 feet deep, and even for small hobby farms that use well water for livestock and irrigation. The key there is calculating how much power your pump needs to lift water that far. A 500-foot well needs a pump that can push water up 500 vertical feet, which uses more power than a 100-foot well. But again, that’s just part of the sizing process. We’ll do a quick calculation to figure out your pump’s total hourly power use, then add that to your home’s total power use to get the right system size. For a farm with a high-horsepower pump, we might even add a solar array that’s sized to cover 100% of both your home and well power use, so you never see a bill.
Wait, what about net metering? That’s another big one for well owners. Most utilities in the U.S. have net metering policies that let you earn credits for any extra power your solar system produces. If you run your well during the day, when your panels are cranking out power, and you use less power than your panels make, that extra goes back to the grid. Then, when you run your well at night—maybe you have an automatic timer that fills your well tank after dark, or you need to pump water first thing in the morning—you pull power from the grid, and those credits you earned during the day cover that. For a well owner, this means you can run your well almost entirely on solar without ever worrying about running out of power or paying extra for nighttime use. I had a customer in Iowa who uses his well pump to water 5 acres of corn and soybeans. His system is sized to cover his home, his well pump, and even power for his farm equipment’s electric tools. During the growing season, when he’s running his well every day, he actually has a $0 electric bill, and in some months he gets a small check from the utility for the extra power he feeds back.
Is there any scenario where on-grid solar isn’t a good fit for a well owner? The only time I’ll tell a well owner that on-grid solar might not be the best option is if they have a well that runs almost exclusively at night. If you’re pumping water all night long, like for a commercial operation that needs consistent 24/7 water access, on-grid might not make sense because you’d be drawing power from the grid during the night, when your solar system is offline (unless you have batteries, but batteries add extra cost). But even then, there are workarounds. We can install a system that’s sized to cover most of your daytime well use, and you can draw on grid power for any nighttime pumping, offsetting that with the credits from your daytime extra power. For most residential and small farm well owners, though, the nighttime pumping is minimal—you might have your well tank set to fill once a day during the day, so you don’t need power at night. That’s the sweet spot for solar.
Another thing to consider: maintenance and reliability. On-grid solar systems have very few moving parts, so they’re low-maintenance. Once they’re installed, you just need to clean the panels once or twice a year, and get a quick checkup every few years. Well pumps, of course, need their own maintenance—oil changes, seal replacements, etc.—but that has nothing to do with your solar system. I always tell my customers that their solar system won’t cause issues with their well pump, and vice versa. The only thing that can cause problems is if you install a system that’s too small, or don’t have the right inverter to handle the pump’s startup load. That’s why working with a local, experienced on-grid solar supplier is so important. You don’t want a big national company that’s installing hundreds of systems a month and doesn’t understand how well pumps work. Someone who’s worked in your area will know the average well depth, the common pump sizes, and how your local utility’s net metering works, so they can size the system correctly.
Let’s talk about cost, because that’s what most people care about. How much does it cost to add a well-compatible on-grid solar system? The average cost for a residential on-grid system is between $15,000 and $25,000 before tax credits. The federal solar tax credit, which is 30% of the system cost, is available through 2032, so that brings the average cost down to $10,500 to $17,500. Adding a well-sized system is only a few thousand dollars more than a standard home system, because you’re just adding a bit more panel wattage and making sure the inverter has enough surge capacity. For most well owners, the payback period is between 5 and 7 years. That’s how long it takes for the savings on your electric bills to equal the cost of the system. After that, you’re saving hundreds of dollars a year, and your system can last 25 to 30 years. I have a customer who installed his system 12 years ago, and he’s saved over $18,000 on electric bills already. That’s a no-brainer, in my book.
Wait, what about well tanks and pressure switches? Do those affect solar compatibility? A lot of people ask about their well’s pressure tank, which stores water so the pump doesn’t have to turn on every time you open a faucet. That pressure tank lets the pump run less frequently, which is actually good for your solar system, because it means less startup load. The inverter only has to handle the pump turning on a few times a day, not every time you use water. That’s a win-win. If you have a pressure switch that’s old and faulty, we usually recommend replacing it when you install solar, because an old pressure switch can make the pump cycle too often, which might cause extra wear on your system. It’s a small, low-cost upgrade that saves you headache later.
I also want to address a common concern I hear: What if the grid goes down? On-grid solar systems are designed to shut off automatically during a grid outage, for safety reasons. That way, line workers repairing power lines don’t get shocked by backfed power from your solar system. If you want to keep your well pump running during an outage, you can add a small battery backup, or a separate transfer switch that connects your well pump to a small battery. But that’s an extra upgrade, not a requirement for pairing solar with your well. For most well owners, the grid doesn’t go down that often, and during those outages, you can either wait it out or use a generator if you need water. If backup power is a top priority for you, we can discuss adding batteries, but it’s not necessary for the core goal of running your well on solar during normal operation.
Let me wrap this up with a real example from last year, to make this concrete. A customer named Mike came to me last spring. He had a 350-foot deep well on his 3-acre property in southern Indiana, and his well pump was a 1,200-watt submersible with a 3,600-watt startup load. His electric bill was $180 a month, most of that going to his well pump, since he uses water for his lawn, garden, and two kids. He’d been nervous about solar because he thought it couldn’t handle his well’s power needs. We did a full audit: we calculated his daily water use (about 400 gallons), found that he runs his pump mostly between 8 a.m. and 6 p.m., exactly when his panels make power. We installed a 13-kilowatt on-grid system with an inverter rated for 8,000 watts of surge capacity—more than enough for his pump’s 3,600-watt startup. When we flipped the switch, his first electric bill was $12. That month, he earned credits for the extra power he fed back to the grid, so he basically paid $12 for the whole month. His payback period is around 6 years, and after that, he’s looking at saving almost $2,200 a year. That’s the kind of result we get all the time when we do it right.
So, to answer the original question clearly: Yes, you can absolutely have an on-grid solar system if you have a well. The key is working with an experienced on-grid solar supplier who understands well pumps, knows how to size your system to handle the surge load, and can align your solar production with your water use patterns. You don’t have to choose between your well’s reliability and saving money on electric bills. You can have both.

If you’re ready to stop paying high electric bills for your well, or you have more questions about how solar would work for your specific well, I’d encourage you to reach out for a free consultation. We can come to your property, check your well pump, your daily water use, and your roof or ground space for panels, and put together a custom quote tailored just for you. No pressure, no sales pitch—just straight answers about how solar can work for your home or farm.
MPPT References
- U.S. Energy Information Administration. (2023). Residential Electricity Consumption and Expenditures.
- Interstate Renewable Energy Council. (2022). Net Metering Policies Across the United States.
- National Ground Water Association. (2021). Residential Well Pump Sizing Guide.
- Solar Energy Industries Association. (2023). On-Grid Solar System Design and Installation Best Practices.
Jingsun New Energy and Technology Co., Ltd.
Jingsun New Energy and Technology Co., Ltd. is one of the most professional on grid manufacturers and suppliers in China, featured by good service and competitive price. Please rest assured to buy or wholesale high quality on grid made in China here from our factory.
Address: Xinhua International Qianshan Road, Hefei City, Anhui Province.(Anhui Address); Huaxi Road, Suzhou, Jiangsu Province.(Jiangsu Address)
E-mail: sale21@jingsun-solar.com
WebSite: https://www.jingsun-power.com/